Home - Getting Started - Constructor - Initialization - Functions - Examples
Basic Example - Find Device
Basic Example
Description
Demonstrates basic usage of the library.
Code
#include "MAX17043.h"
void setup()
{
//
// Initialize the serial interface.
//
Serial.begin(115200);
delay(250);
//
// Wait for serial port to connect.
//
while (!Serial) {}
Serial.println("Serial port initialized.\n");
//
// Initialize the fuel gauge.
//
if (FuelGauge.begin())
{
//
// Reset the device.
//
Serial.println("Resetting device...");
FuelGauge.reset();
delay(250);
//
// Issue a quickstart command and wait
// for the device to be ready.
//
Serial.println("Initiating quickstart mode...");
FuelGauge.quickstart();
delay(125);
//
// Display an initial reading.
//
Serial.println("Reading device...");
Serial.println();
displayReading();
}
else
{
Serial.println("The MAX17043 device was NOT found.\n");
while (true);
}
}
void loop()
{
displayReading();
delay(2000);
}
void displayReading()
{
//
// Get the voltage, battery percent
// and other properties.
//
Serial.println("Device Reading:");
Serial.print("Address: 0x"); Serial.println(FuelGauge.address(), HEX);
Serial.print("Version: "); Serial.println(FuelGauge.version());
Serial.print("ADC: "); Serial.println(FuelGauge.adc());
Serial.print("Voltage: "); Serial.print(FuelGauge.voltage()); Serial.println(" mV");
Serial.print("Percent: "); Serial.print(FuelGauge.percent()); Serial.println("%");
Serial.print("Is Sleeping: "); Serial.println(FuelGauge.isSleeping() ? "Yes" : "No");
Serial.print("Alert: "); Serial.println(FuelGauge.alertIsActive() ? "Yes" : "No");
Serial.print("Threshold: "); Serial.print(FuelGauge.getThreshold()); Serial.println("%");
Serial.print("Compensation: 0x"); Serial.println(FuelGauge.compensation(), HEX);
Serial.println();
}